Shower Kit Bench Installation Instructions
The Cedar Bench is designed to be installed against a Large Shower Panel (44″ Wide)
Contact us for any custom options.
Locate the Bench Brackets and install them in the lower right and left corners of the Large Panel. Be sure the angle cut on the Bracket is toward the ground. Use (2) of the 6″ TimberLoks to secure each Bench Bracket into the lower corners of the Large Panel. TimberLok will go through the panel frame and into the 4×4 support.
Set the Bench on top of the brackets and secure it to the Brackets by using (4) 2-1/2″ Screws (not included with the Kit) through the 2×4 Fascia on the front of the Bench into the brackets.